cannabis

Steps Taken to Properly Investigate a Customer Complaint

Steps Taken to Properly Investigate a Customer Complaint

Customer complaints against a cannabis pharmaceutical company must be taken seriously. Not only is it part of GMP — Good Manufacturing Practices — but the potential for lawsuits can be heavy in this new industry that is still largely unregulated.

Top 5 Tips to Reduce Batch Mixup in Manufacturing and Warehousing

Top 5 Tips to Reduce Batch Mixup in Manufacturing and Warehousing

When you’re producing cannabis-related products in the manufacturing industry it’s important to follow GMP. This includes having a good labeling and recording system in place to reduce batch mixup in both the manufacturing and warehousing sections of your plant.

Top 5 Ways to Reduce Risk During Manufacturing

Top 5 Ways to Reduce Risk During Manufacturing

Let’s face it.  Accidents happen and people make mistakes.  That being said, a good Quality System and Safety Program will continuously seek out potential areas of risk and patch the areas by implementing change control and process improvement.  These practices are widely known throughout the compliance-world as HACCP – Hazards and Critical Control Points. While there are external factors that you may have little control over, the more you consider risk ahead of time and what procedures to put in place to prevent them from happening in the future, the less likely there will be large financial losses for your company.

The Importance of Requesting a Certificate of Analysis on Finished Cannabis Products Before Consuming

The Importance of Requesting a Certificate of Analysis on Finished Cannabis Products Before Consuming

People who are consuming cannabis products for any reason must be careful when searching for a quality pharmacy that provides safe and legal sources of cannabis products. No matter what types of products they’re seeking—dried, oil, extract, butter, etc.—these products should have been produced through GMP—Good Manufacturing Practices. One of the best ways to determine if a cannabis product follows safety compliance for consumption is through a CoA, or Certificate of Analysis.

Why the FDA Raided a CBD Manufacturer and What That Means for the CBD Industry

Why the FDA Raided a CBD Manufacturer and What That Means for the CBD Industry

Well folks, it finally happened.  The FDA raided a CBD Manufacturing Site. 

This wasn't the first presence that the FDA had in the CBD world.  Several warning letters have been distributed over a course of the past few years - all of them focused on improper marketing by the CBD companies in which claims were made that the products could cure, mitigate, or treat diseases. 

Why It’s Easier to Start GMP When You’re a Small Company Than When You’re a Large Company

Why It’s Easier to Start GMP When You’re a Small Company Than When You’re a Large Company

If you’re in the process of setting up a small cannabis-related company, now is the best time to start GMP, or Good Manufacturing Practices. Not only do these help with the efficient operation of your manufacturing facility, they can help with every aspect of your operation, including helping to license and regulate your operation.

Why 70% Ethanol Is The Most Effective Disinfectant for Any Food or Pharma Facility

Why 70% Ethanol Is The Most Effective Disinfectant for Any Food or Pharma Facility

Cleaning a GMP production facility is essential for compliance, as well as safety of the products that are sold to dispensaries and consumers. Ethanol is one of the more popular cleaners used for production line equipment because it is effective, easy to recover, and food grade. Since it’s so effective at killing bacteria and microbes, many plant managers may wonder why 190 proof (or 95%) ethanol shouldn’t be used over 70% ethanol.

What is FIFO and Why Is It Important?

What is FIFO and Why Is It Important?

If you’re running a cannabis or dietary supplement type of GMP production facility, then your products are reliant on being sold well before expiry dates. Failure to manage this means that you’d have expired stock on shelves that can cost you losses and can also compromise the safety of the products you’re providing to the consumer market. FIFO is the industry standard in food production safety.

How to Choose a Proper Lab Coat

How to Choose a Proper Lab Coat

A lab coat worn by workers in a cannabis product or dietary supplement manufacturing facility needs to follow specific requirements. These are very similar to food manufacturing facilities too. Instead of requiring your personnel to buy their own lab coats, the GMP production facility should be providing ones for their lab workers and production line workers to prevent any issues.

Dear Cannabis Manufacturer: Why Following GMP Saves Your Company Money in the Long Run

Dear Cannabis Manufacturer: Why Following GMP Saves Your Company Money in the Long Run

Having your cannabis manufacturing facility follow GMP–Good Manufacturing Practices–can save you money in the long run. It’s tempting to try and cut corners by operating without a QA department, but you should be aware that there are many concerns that can cost you money and consumer trust in the longterm.

Choosing Pest Control in a Food Production Setting

Choosing Pest Control in a Food Production Setting

Wherever there are humans there will be pests. Pests love to follow humans, as we provide them with a ready source of food. Often pests are attracted to outdoor disposal bins, before heading indoors to warmth and a ready access of food. If you’re running a GMP production facility then you’ll need to take pest control seriously.

How to Complete an IQOQPQ

How to Complete an IQOQPQ

When you run a GMP production facility that includes cannabis and dietary supplement products, there are certain processes that you must follow in order to achieve government compliance. Cannabis products should follow similar guidelines in food processing and the pharmaceutical industry.  This includes qualifying equipment before using it to produce food or medicine.

Why It’s Important to Take Customer Complaints Seriously

Why It’s Important to Take Customer Complaints Seriously

If you’re running a cannabis manufacturing facility there will be new government regulations ahead. It’s important to stay in compliance and obtain the expertise of GMP advisors who can guide you through setting up a sanitary and productive facility. If your facility has received a customer complaint it’s important to take it seriously.

How to Perform an Effective CAPA

How to Perform an Effective CAPA

If there has been a failing in one of your cannabis products or dietary supplements in your production facility, then you’re going to need to figure out what went wrong and how to prevent it from happening again. This is a part of GMP—Good Manufacturing Practices—in the food and pharmaceutical industries, and will also help you to achieve compliance.  

How to Communicate Effectively with a GMP Auditor

How to Communicate Effectively with a GMP Auditor

In order to obtain GMP certification you’ll need to learn how to communicate effectively with your GMP auditor. This is an important national certification that provides a standard of quality insurance to show other companies that your cannabis products are safe and pure. However, undergoing an audit can be a stringent and rigorous process. Perhaps the audit will be the toughest part of setting up a new cannabis manufacturing business.

How to Determine Product Expiration Dates Using Accelerated Stability Studies

How to Determine Product Expiration Dates Using Accelerated Stability Studies

One of the steps toward achieving cannabis compliance for is by assessing shelf life. Stability studies are required in GMP and are vital to any quality assurance system.  Expiration dates will need to be printed onto product packaging in order to protect consumers and your company by ensuring the quality of a product through a specific time.

What Are the Necessary Components of a Batch Production Record?

What Are the Necessary Components of a Batch Production Record?

If your cannabis or dietary supplement business is in production, you’ll need to ensure that you keep excellent records to document and guide each step of manufacturing. The batch production record, or BPR, is one of the most important forms that your facility workers will need to fill out. Batch production records are a crux of any quality assurance system and are necessary to abide by Good Manufacturing Practices, or GMP. 

Indications That a Certificate of Analysis is Legitimate

Indications That a Certificate of Analysis is Legitimate

Just like a store who supplies cannabis products, the consumer also wants to know that the cannabis they are buying is safe for consumption. One of the best ways to determine this is by asking to see a CoA, or Certificate of Analysis. Each properly manufactured cannabis product will have a CoA.

How to Write a Standard Operating Procedure

How to Write a Standard Operating Procedure

An SOP or Standard Operating Procedure is something that all types of organizations, manufacturers, and laboratories can benefit from in the cannabis industry. For a cannabis manufacturer, SOPs can help in achieving Good Manufacturing Practices (GMP) compliance. If your facility hasn’t created standard operating procedures yet, or they’re only at the basic level, you’ll benefit from learning how to write them.